RACAL INTERLAN, INC. NI5210/8-UTP, NI5210/16-UTP NIC Type Ethernet Transfer Rate 10Mbps Data Bus 8-bit ISA Topology Star Wiring Type Unshielded twisted pair AUI tranceiver via DB-15 Boot ROM Available [Image] CABLE TYPE Type JP3/A-H Unshielded twisted pair Pins 1, 2, & 3 closed AUI transceiver via DB-15 port Pins 2, 3, & 4 closed BOOT ROM ADDRESS Address JP1/G JP1/H JP1/I JP1/J C0000h Pins 1 & 2 Pins 1 & 2 Pins 1 & 2 Pins 1 & 2 closed closed closed closed C4000h Pins 1 & 2 Pins 1 & 2 Pins 1 & 2 Pins 2 & 3 closed closed closed closed » C8000h Pins 1 & 2 Pins 1 & 2 Pins 2 & 3 Pins 1 & 2 closed closed closed closed CC000h Pins 1 & 2 Pins 1 & 2 Pins 2 & 3 Pins 2 & 3 closed closed closed closed D0000h Pins 1 & 2 Pins 2 & 3 Pins 1 & 2 Pins 1 & 2 closed closed closed closed D4000h Pins 1 & 2 Pins 2 & 3 Pins 1 & 2 Pins 2 & 3 closed closed closed closed D8000h Pins 1 & 2 Pins 2 & 3 Pins 2 & 3 Pins 1 & 2 closed closed closed closed DC000h Pins 1 & 2 Pins 2 & 3 Pins 2 & 3 Pins 2 & 3 closed closed closed closed E0000h Pins 2 & 3 Pins 1 & 2 Pins 1 & 2 Pins 1 & 2 closed closed closed closed E4000h Pins 2 & 3 Pins 1 & 2 Pins 1 & 2 Pins 2 & 3 closed closed closed closed E8000h Pins 2 & 3 Pins 1 & 2 Pins 2 & 3 Pins 1 & 2 closed closed closed closed EC000h Pins 2 & 3 Pins 1 & 2 Pins 2 & 3 Pins 2 & 3 closed closed closed closed BASE I/O ADDRESS Address JP1/A JP1/B JP1/C JP1/D JP1/E JP1/F 200h Pins 1 Pins 1 Pins 1 Pins 1 Pins 1 Pins 1 & & 2 & 2 & 2 & 2 & 2 2 208h Pins 1 Pins 1 Pins 1 Pins 1 Pins 1 Pins 2 & & 2 & 2 & 2 & 2 & 2 3 210h Pins 1 Pins 1 Pins 1 Pins 1 Pins 2 Pins 1 & & 2 & 2 & 2 & 2 & 3 2 218h Pins 1 Pins 1 Pins 1 Pins 1 Pins 2 Pins 2 & & 2 & 2 & 2 & 2 & 3 3 220h Pins 1 Pins 1 Pins 1 Pins 2 Pins 1 Pins 1 & & 2 & 2 & 2 & 3 & 2 2 3D8h Pins 2 Pins 2 Pins 2 Pins 1 Pins 2 Pins 2 & & 3 & 3 & 3 & 2 & 3 3 3E0h Pins 2 Pins 2 Pins 2 Pins 2 Pins 1 Pins 1 & & 3 & 3 & 3 & 3 & 2 2 3E8h Pins 2 Pins 2 Pins 2 Pins 2 Pins 1 Pins 2 & & 3 & 3 & 3 & 3 & 2 3 3F0h Pins 2 Pins 2 Pins 2 Pins 2 Pins 2 Pins 1 & & 3 & 3 & 3 & 3 & 3 2 3F8h Pins 2 Pins 2 Pins 2 Pins 2 Pins 2 Pins 2 & & 3 & 3 & 3 & 3 & 3 3 Notes:Pins designated should be in the closed position. A total of 64 base I/O addresses are available. The jumpers are a binary representation of the decimal memory addresses. Jumper JP1/F is the Least Significant Bit and JP1/A is the Most Significant Bit. The jumpers have the following decimal values: JP1/F=8, JP1/E=16, JP1/D=32, JP1/C=64, JP1/B=128, JP1/A=256. Configure the jumpers and add 512 and the values of the jumpers closing pins 2 & 3 to obtain the correct memory base I/O address. INTERRUPT SETTINGS IRQ JP2 2 Pins 1 & 2 closed 3 Pins 3 & 4 closed 4 Pins 5 & 6 closed 5 Pins 7 & 8 closed 6 Pins 9 & 10 closed 7 Pins 11 & 12 closed IBM PC/XT COMPATIBILITY Setting JP4 NIC installed in main board slot 8 Closed NIC installed in main board slot 1-7 Open Note:This jumper only applies when the NIC is installed in an IBM PC/XT. ONBOARD RAM/BOOT ROM CONFIGURATION Function JP1/K JP1/L 8KB of RAM installed Pins 2 & 3 closed N/A (NI5120-UTP-8) 16KB of RAM installed Pins 1 & 2 closed Pins 1 & 2 closed (NI5120-UTP-16) 8KB of RAM and Boot ROM Pins 1 & 2 closed Pins 2 & 3 closed installed Note: Socket U6 can either be an 8K RAM chip or a Boot ROM. [Image] DIAGNOSTIC LEDS LED Color Status Condition LED1 Red Off Data is not being received LED1 Red On Data is being received LED2 Yellow Off Data is not being transmitted LED2 Yellow On Data is being transmitted LED3 Green Off UTP link status OK LED3 Green On UTP link broken LED4 Red Off AUI port selected LED4 Red On UTP port selected Note: LED3 is only active when the UTP port is selected.